VocoPro KJ-7000 Pro Operations Instructions download pdf (Page 16)

Advanced Operations

Crossfader

Master Cueing

Master Cueing will cue the MASTER OUTPUT to the headphones. This is commonly used to isolate the audio

signal to the headphones. Master cueing makes it possible to practice when “audible” music is not permitted

i.e. late night practicing at home. To MASTER CUE, make sure the CUE/MASTER button is set to MASTER

and adjust the CUE LEVEL control to a desired volume level. Note: When master cueing, pressing any

channels individual Cue button will not affect output to the headphones as those buttons only work when

channel cueing.

Crossfading between sources

The crossfader allows you to “mix” or crossfade between two channels. To do this, you need to first ASSIGN

the two channels to your CROSSFADER. On each side of the CROSSFADER, there is an ASSIGN button.

The LEFT ASSIGN button can assign either CHANNEL 1 or 2, while the RIGHT ASSIGN button can assign

either CHANNEL 2 or 3. Once you have your desired channels assigned, move their respective CHANNEL

FADERS to an audible level, and slide the CROSSFADER back and forth to crossfade. Note: If you assign

channel 2 on both sides, the crossfader will not crossfade.

Video Selector

Switching Between Video Channels

If you have more than one A/V source connected, and would like to switch video channels for output to a

display device, you would use the VIDEO SELECTOR toggle switch. The switch will toggle between

CHANNELS 1, 2 and 3.

Record

Recording a Performance or Mix

To RECORD a mix or performance, connect a line-level patch cable from the RECORD OUT to the AUDIO IN

of a recording device.

VIDEO SEL.

RECORD

CUE MASTER

CUE

MASTER

Level

0 10

Increase Decrease

ASSIGN

2 2

ASSIGN

- (LD Video IN)

- (DVD Video IN)

- (CDG Video IN)

DAT

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

VocoPro KJ-7000 Pro Operations Instructions Page 16