VocoPro CDG X-3 Mark II Owner's Manual download pdf (Page 6)

Unpacking The Bravo

Carefully remove The Bravo from its carton before discarding the packaging materials. If it should become necessary to return the unit for

any reason the original packaging materials are best suited for transporting the unit to minimize any potential damage.

BE SURE YOU HAVE THE PARTS AND COMPONENTS INCLUDED WITH THE BRAVO.

Thank you for purchasing The Bravo. At VocoPro we care about product quality and customer satisfaction.

We know The Bravo will provide years of quality enjoyment and reliable music entertainment for you when

used properly.

BEFORE YOU START

PLEASE READ CAREFULLY BEFORE USING YOUR NEW BRAVO

CONNECTING A TELEVISION MONITOR

If you will be connecting The Bravo to a television monitor use the RCA video connector

wire that is included. On the back of the player, locate the RCA connector jack labeled “VIDEO

OUTPUT”, it is color coded in yellow. Connect either end of the RCA connector wire to the

“VIDEO OUTPUT” jack and the other end to your television monitor. There should be an RCA

connector jack, just like the one on the back of the player, labeled video input. Connecting this

wire will enable your television monitor to display the graphics that are encoded on CDG

Karaoke discs. NOTE: If your television does not have an RCA type connector you may use the

RF Modulator jack on the back of the Bravo.

SUPPLYING POWER TO THE BRAVO

IMPORTANT! Be sure all your components i.e., TV monitor, etc.., are

connected to the Bravo BEFORE connecting to a power source and supplying

power to the unit. Be sure to use caution when plugging in any electrical

appliance. The Bravo comes with it’s own standard wall outlet power cord. It is

attached to the back of The Bravo player unit. Plug the power cord into any

wall outlet or surge protector.

CONNECTING A MICROPHONE

1. Using a microphone cable, designed for use with most Karaoke

products, connect a microphone to the end of the cable with the

“XLR” connector (see diagram).

2. Connect the end of the cable with the ¼” connector into either

of the ¼” jacks on the front of The Bravo amplifier player.

QUICK START

¼” jack

IMPORTANT! Before connecting a microphone, be sure the power is off or the volume is turned

all the way down. When the microphone is plugged in and the unit is on do not point the

microphone directly toward the speakers or leave an unattended microphone too close to the

speakers when the volume is up. This can create a loud squeal called “feedback” and could

possibly damage your speakers.

“XLR”

connector

1 VocoPro Bravo CDG & Cassette

Karaoke Player

1 RCA cable for video hookup

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

VocoPro CDG X-3 Mark II Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Karaoke systems VocoPro CDG X-3 Mark II